|
The
advanced airfoil design of the NautiCAN nozzle has 17
times less resistance than a conventional 19a nozzle. This
results in greater fuel efficiency and more delivered
power.
With the H-E nozzle the highest possible speed and
bollard pull is obtained. Bollard pull increases up to
60%, and increases in speed of 0.5 - 2 knots are
guaranteed, even when the nozzles are replacing open
propellers.
To
obtain a perfect airfoil profile, the nozzle is
manufactured out of thirty-six airfoil sections.
This unique framing technique along with the nozzle
profile results in the superior strength and performance
of the H-E nozzle. Unlike a conventional nozzle, the
inside surface of the NautiCAN nozzle is made entirely of
stainless steel. This eliminates the costly welding
repairs that occur with other nozzles. The advanced
construction of the H-E nozzle completely eliminates plug
welds; this greatly adds to the structural strength and
integrity of the nozzle.
Thrust can be increased an additional 4-6% with the
pre-swirl stator. |
